Guide to Troubleshooting HP Laserjet Pro M12w Technical Issues

HP Laserjet Pro m12w is the most selling product of the time. Its alluring features and high-class performance makes it even more desirable. Call upon HP Support Assistant Number for any help and solution.

Poor Printing Quality:

Always Use Authentic Products:

• Always purchases replaceable items, peripherals or other products only from the authorized HP stores. 
• Make sure you use the perfect matching toner or ink cartridges for your HP Laserjet Pro m12w printer. 
• It is important to set the right printer setting and good quality of the paper. 
• Do not re-use rough papers as bent or creased paper can affect the quality of prints.

Adjust Mode Settings:

Settings play an important role in determining the print quality, so one must adjust the settings as per the requirements before beginning the printing session.

Always keep in mind that eco mode is meant to save the ink and not accurate for quality prints. So when precise printing is required, switch the printing mode.

• To set the quality: Properties>>options>>Printer setup>> Printer preference and then Print quality area. 
• For darker prints, set the DPI as 600 and enable the Economode. 
• For light prints, select FastRes 1200 and disallow the Economode.

Check Ink or Toner Cartridge Level:

Without proper ink or toner supplies, printing would be difficult. To check the level of printing, follow the below given steps:

• To check the ink or toner level, it is suggested to print the Supplies status page or EWS. 
• To print EWS: 
• For windows: Devices and printers> Properties>Options> Printer setup> Preferences> Supplies status page>print. 
• For Mac: go to Printers>> Options and supplies>>Utility>>Open printer utility >print>supply status page.

Replace the Toner:

Make sure you have the proper supply, it is advisable to replace the ink or toner cartridge for the proper printing quality, yield, and speed.

• Make sure you check the ink level first. 
• Open your printer and then remove the lid from the cartridge, shake the toner gently for even distribution of ink. 
• Remove the tape from toner and insert it gently without removing the green regions of the toner.

Restore Factory Settings on HP Laserjet Pro m12w:

To retain the original settings for your printer, perform the below-given steps in a consecutive manner. Call HP Customer Care Number if you come across any complication:

• Start the printer. 
• Remove the chords and reset the printer. 
• Now place the chords again and wait for few seconds. 
• Once the printer is reset, everything will be cleaned, you will lose all connections 
• After that, on the touch panel, press OK 
• Select the setup icon. 
• Choose the service menu Select the restore default option. 
• Click ok finish.

To Resolve The Paper Jam Issues:

• Remove all the papers from the printing tray
• Make sure the paper you are using is high quality as per the requirements. 
• Cleaning the printer is the most effective solution to the paper jam issues. 
• Make sure you do not insert the different sizes of quality of papers as it can promote paper feed or jam issue. 
• Remove the existing paper from the input tray by gently dragging it into the direction of printing. 
• Make sure you remove every alien object, dirt, and dust from the output bin. 
• After cleaning the tray, move to the rear of the printer and clean it thoroughly. 
• Once cleaned, shut down the printer, remove the power chord from the wall socket. 
• Wait for few minutes before reconnecting 

Start your printer and print a sample.

If you are facing any issue with your HP Laserjet Pro m12w, dial the HP Printer Support Number for an immediate resolution to your problem.